Go to home page
Aluminium constructions for your safety
Home > Products > Ladders > Cage ladders > Specification guide
prod3

Cage ladder - Specification guide

More detailed and specific information about the configuration and dimensions of a safety cage ladder.

Cage ladders specification guide

1. Materials

  • Only materials not subject to corrosion can be used. The ladder is made of aluminum alloy profiles, anodized 10 micron, natural mat finishing; fasteners (bolts, rivets and washers) of stainless steel A2-70 DaN/mm2; joint washers, bushes, plugs, etc. in polyamide and elastomer.
  • No protective treatment, painting or maintenance is required, except when exposed to aggressive environments.
  • No welding is allowed. The rungs are clinched into the uprights. Bolts and rivets are used for all other assembly.
  • The ladder can be polyester powder coated in any RAL color (option).

2. Installation

  • Cage ladders are installed vertically.
  • A single type of fixing clamps is used for the attachments of wall fasteners and safety cage hoops to the ladder uprights. These fixing clamps can be clipped to the ladder uprights at any desired position.
  • In order to take into account the different thermal expansion of the wall structure and the ladder, the ladder can expand freely within its anchor brackets without deformation or damage.
  • For lateral access to the ladder, the upper rung will be at approximately 5 ft or 1.5 m above the upper point of access. For access from the top, widened upright projections, allowing a passageway of at least 2’4” or 62 cm, can be used. In the latter case the upper rung is at level with the access floor.

3. Dimensions

  • The ladder corresponds to standards EN 131 and ISO 14122-4.
  • The ladder is composed of standardized elements of 11 ft or 3.36 m maximal length, which are assembled to the desired length. These elements are connected by perforated aluminum sleeves that are shifted inside the uprights. Bolts are used for fastening.
  • The uprights are spaced at 1’4” or 400 mm, the rung axes at 11” or 280 mm.
  • The ladder uprights have an oblong section (2-15/16” x 1” x 5/64” or 75 x 26 x 2 mm) with rounded corners. The rungs are round (Ø 1-1/2” or 33 mm) with a flattened and grooved anti-slip upper face.

4. Safety Cages

  • The manufacturer can equip the ladder with a safety cage, consisting of hoops and vertical bars. The hoops are bent hollow square profiles of 1” x 1” x 1/16” or 25 x 25 x 1.5 mm and the vertical bars are hollow round profiles of Ø 11/16” x 3/32” or Ø 18 x 2 mm. The safety cage is available with complete hoops, 3/4 hoops or 1/2 hoops. The free passage in the safety cage is +/- Ø 2’3” or 70 cm. The vertical hoop spacing has to be adaptable, but shall not exceed 1 m.
  • The manufacturer can equip the ladder with rest platforms with safety cage. The ladder is available in multi-flight composition.
  • The manufacturer can equip the ladder with a fall arrest system according to standard EN 353-1. The lifeline shall be based on a fixed aluminum rail and guided fall arrester.
  • The manufacturer can equip the ladder with a counterbalanced lower sliding ladder to prevent access by unauthorized persons:
    • clearance height, i.e. the distance between the floor and the foot of the sliding ladder is maximum 9’10” or 3 m;
    • the sliding part is counterbalanced by weights that shift in hollow profiles; axes, springs and cables are of stainless steel, pulley wheels of polyacetal (POM-H);
    • release of the sliding part is possible via a mechanism controlled from above, from below or from the side (to be specified). Release via a foot treadle is possible.

Change language and region

Please select your language:
Please select your region:
Sélectionez votre région:
Kies uw regio:

Search this site

To be implemented

Shop

To be implemented

Sign in

You are not signed in. Sign in using your google account.

Signed in

You are logged in as: .

Sign in error

Something went wrong. We have not received your request. Please try submitting your request again, or contact us directly.. You are not signed in.

Sitemap

Breadcrumb

You are here: Home > Products > Ladders > Cage ladders > Specification guide

Cookies

This site uses cookies. By continuing to browse this website, or by clicking "I agree" you consent to the use of cookies. What are cookies?